Project Description

j
j

Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure.

N-100 Series

N-100

j
j

1" Valve - FIP

N-100S

j
j

1" Valve - Slip X Slip

N-100MB

j
j

1" Valve - Male X Barb

  • 100% water tested
  • 150 PSI (10,3 BAR) rating
  • Unique “reverse flow” design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure, providing zero stress to prevent “stretching,” a common cause of valve failure
  • Reverse flow design for water conservation in the event of failure
  • Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
  • Molded shock cone for smooth operation and reduction of water hammer
  • Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
  • Marine-grade S20P solenoid with stainless steel actuator
  • Engineering grade PVC body and Phillips retaining screws
  • Non-rising flow control stem throttles valve from full open to closed position on flow control models
N-100-H N-100F-H

1″ Valve – FIP 1″ Valve – FIP
with Flow Control
Electrical
24VAC/60HZ Inrush: 9.48 VA
Holding: 5.11 VA
24VAC/50Hz Inrush: 10.66 VA
Holding: 5.97 VA
N-100S-H N-100SF-H

1″ Valve – Slip x Slip 1″ Valve – Slip x Slip
with Flow Control
Electrical
24VAC/60HZ Inrush: 9.48 VA
Holding: 5.11 VA
24VAC/50Hz Inrush: 10.66 VA
Holding: 5.97 VA
N-100MB-H N-100MBF-H

1″ Valve – Male x Barb 1″ Valve – Male x Barb
with Flow Control
Electrical
24VAC/60HZ Inrush: 9.48 VA
Holding: 5.11 VA
24VAC/50Hz Inrush: 10.66 VA
Holding: 5.97 VA

Design Specifications

Nitro Valve Design Specifications

How To Specify


N-100 Series Specifications
click to enlarge

N-100 Series Valve
Pressure Loss
click to enlarge

Downloads

Help & Support